Machine & Part setup
Tera Terminal for troubleshooting RS232 setup and CNC communications parameters
By Learn CNC basics - Posted on February 15th, 2011
Tagged:
This is a short video from us showing you how to troubleshoot RS232 problems using a nice little free RS232 program called Tera Terminal. This software does crash pretty often when using, however it still works really good for changing settings on the fly. Sending repeat data for testing and manually turning on some signals by clicking the LED's in the software.
Video:
Sorry, you need to install flash to see this content.
Bottom:468x60
MasterCam X3 Tutorial Part 3
By Learn CNC basics - Posted on April 23rd, 2009
Tagged:
MasterCam X3 Tutorial Part 3, Drill and ream a hole setup using Mastercam CAM software.
Video:
Sorry, you need to install flash to see this content.
Diy CNC Tutorial #1: How To Calculate Steps Per Inch
By Learn CNC basics - Posted on April 23rd, 2009
How To Calculate Steps Per Inch for setting up any CNC machine for hobby or building your own DIY CNC, CNC Router, milling machine.This tutorial will show you how to calculate the gear ratio, motor revolutions and steps per inch.
Video:
Sorry, you need to install flash to see this content.
